This is a fundamental device to maintain the consistent temperature for a certain amount of time as it is used for moisture measurement, drying, removal of solvent in heat resistance test, and hardening for the experiment device.
-> Air circulating method – Circulate internal temperature by forcefully operating a fan and maintain consistent temperature
-> Major temperatures: 40℃ - 200℃
-> Manufactured goods: 80ℓ, 150ℓ
-> Custom manufacturing available
This is a fundamental device to maintain the consistent temperature for a certain amount of time as it is used for moisture measurement, drying, removal of solvent in heat resistance test, and hardening for the experiment device.
-> Air circulating method – Circulate internal temperature by forcefully operating a fan and maintain consistent temperature
-> Major temperatures: 40℃ - 200℃
-> Manufactured goods: 252ℓ, 410ℓ
-> Custom manufacturing available
Vacuum dry oven is a product used when it is not possible to dry samples only with regular air circulation dry oven, especially when oxidizing reaction occurs if combined with oxygen making it not available to use.
-> Major temperatures: 40℃ to 200℃
-> Manufactured goods: 8l, 27l, 64l
This is an industrial dry oven to dry mass amount of materials with a large-sized dry oven mostly used in the field of production.
-> Major temperatures: 40℃ - 200℃
-> Manufactured goods: 864l, 1152l, 2250l
-> Custom manufacturing available with size or temperatures
This is the vacuum dry oven to adjust the temperature by heating the plate directly by adding the heater on the plate.
-> Major temperatures: 40℃ to 200℃
-> Manufactured goods: 27l, 64l
-> Available with custom manufacturing including the size and temperature
General air circulation dry oven might cause deformation of the device or many other problems due to the thermal impact if used for a long time in high temperature of 200℃ or above. Therefore, this is the high temp dry oven to choose if using for a long time in high temperature of 200℃ or above.
-> Major temperatures: 40℃ to 300℃
-> Manufactured goods: 90ℓ, 150ℓ, 252ℓ
-> Select with table unified option
-> Custom manufacturing for large size
Constant temp & humi chamber for desk is the small sized constant temp chamber designed for the desk in order to relieve the burden of the size as a device used for the experiment for durability and reliability by forming the limited temperature and humidity inside.
-> Small constant temp chamber
-> Major temperature : S-TH31 5℃ ~ 98℃ S-THSC31 -20℃ ~ 98℃
General water tank is a product to use when maintaining the consistent temperature in water tank, soil leaching or sinking, and occurrence.
-> Major temperature : 40℃ ~ 99℃
-> Manufactured goods : 11ℓ , 22ℓ
-> Available for custom manufacturing
Cold trap is a device to freeze and condense the hazardous gas or moisture during the vacuum drying process from vacuum dry oven prior to the vacuum pump.
-> Major temperatures : R1: -40℃ (Less than RT.25℃)
R2: -70 ℃ (Less than RT.25℃)
-> Available for custom manufacturing
High temp vacuum dry oven is to be safely used in a wide range of fields including the physical and chemical experiment, moisture removal, and spray in the use of vacuum status.
-> Major temperatures: 180℃ to 300℃
-> Manufactured goods: 8l, 27l, 64l
-> Available with custom manufacturing including the size and temperature
Super High Temp Dry Oven is the super high temp air circulation dry oven to choose if using high temperature of 300℃ or above.
-> Major temperatures: 40℃ to 450℃
-> Manufactured goods: 90ℓ, 150ℓ
-> Custom manufacturing for large size
Constant temp & humi chamber is used for the experiment for durability and reliability by forming the limited temperature and humidity inside.
Economic product as it is an economic, entry level controller (T2)
-> Major temperature : +5℃ ~ 98℃
-> Manufactured goods :150ℓ, 252ℓ
- Available for custom manufacturing based on size and temperature
Constant temp chamber is a device reliable to make it feasible to proceed experiment in low temperature other than the one with high temperature.
This device is used when humidity is not required, and when experiment is conducted only with temperature.
-> Major temperature : +5℃ ~ 98℃
-> Manufactured goods : 150ℓ , 252ℓ
-> Custom manufacturing from the size or temperature
Cold trap is a device to freeze and condense the hazardous gas or moisture during the vacuum drying process from vacuum dry oven prior to the vacuum pump.
-> Major temperatures R1: -40℃ (Less than RT.25℃)
R2: -70 ℃ (Less than RT.25℃)
-> Available for custom manufacturing
High temp vacuum dry oven is to be safely used in a wide range of fields including the physical and chemical experiment, moisture removal, and spray in the use of vacuum status.
-> Major temperatures: 180℃ to 300℃
-> Manufactured goods: 27l, 64l
-> Available with custom manufacturing including the size and temperature
This is the dry oven to dry liquid or powder that cannot be dried after placing them on the shelf as this is a large industrial dry drum oven mostly used in the field of production.
-> Major temperatures: 40℃ to 100℃
-> Manufactured goods: 2744ℓ
-> Available for custom manufacturing
Vertical clean bench (sterilized)
Clean bench is a device applied to the lab and industrial field requiring sterilized working environment
-> Vertical type
-> Manufactured goods : 900ℓ, 1200ℓ, 1500ℓ
Cooling water bath is a product used for the experiment requiring precise temperature control in the low or room temperature.
-> Major temperature : -15℃ ~ 99℃
-> Manufactured goods : 7ℓ , 18ℓ
-> Available for custom manufacturing
Constant temp & humi chamber is used for the experiment for durability and reliability by forming the limited temperature and humidity inside.
Constant temp & humi chamber R1 product uses controller as touch screen.
-> Major temperatures : -20℃ ~ 98℃
-> Manufactured goods : 150ℓ , 252ℓ
-> Available with custom manufacturing according to the size or temperature
Constant temp chamber is a device reliable to make it feasible to proceed experiment in low temperature other than the one with high temperature.
This device is used when humidity is not required, and when experiment is conducted only with temperature.
-> Major temperature : -20℃ ~ 98℃
-> Manufactured goods : 150ℓ , 252ℓ
-> Custom manufacturing from the size or temperature
Incubator is a forced circulating product used for incubating microorganisms or germs to maintain the minimum temperature fluctuation for a certain time period.
-> Major temperatures : 10℃ ~ 60℃
-> Manufactured goods : 80ℓ, 150ℓ, 252ℓ
Cold trap is a device to freeze and condense the hazardous gas or moisture during the vacuum drying process from vacuum dry oven prior to the vacuum pump.
-> Major temperatures : -40℃ (Less than RT 25℃)
-> Manufactured goods : 20ℓ, 40ℓ, 60ℓ
-> Available for custom manufacturing
Cold trap is a device to freeze and condense the hazardous gas or moisture during the vacuum drying process from vacuum dry oven prior to the vacuum pump.
In general, dry oven means to adjust temperature inside by running a fan forcefully in air circulation method. However, when drying tiny sized powders, natural oven is used to prevent powders from being spread due to the wind.
-> Major temperatures: 40℃ to 200℃
-> Manufactured goods: 80ℓ, 150ℓ, 252ℓ
Bio hazard safety clean bench is a clean bench manufactured for removing safety risk when hazardous gas or substances contact with operators during the work as well as the sterilized working environment.
Bio hazard safety clean bench shall be applied for sterilized work of hazardous samples on human bodies or toxic CAS.
-> Manufactured goods: 900ℓ, 1200ℓ, 1500ℓ
Oil bath is a product increasing or maintaining the temperature range that cannot be increased with general water bath though oil instead of water.
-> Major temperature : 5℃ ~ 300℃
-> Manufactured goods : 12ℓ , 24ℓ
-> Available for custom manufacturing
Constant temp & humi chamber is used for the experiment for durability and reliability by forming the limited temperature and humidity inside.
Constant temp & humi chamber R1 product uses controller as touch screen.
-> Major temperatures : -40℃ ~ 98℃
-> Manufactured goods : 150ℓ , 252ℓ
-> Available with custom manufacturing according to the size or temperature
Cold trap is a device to freeze and condense the hazardous gas or moisture during the vacuum drying process from vacuum dry oven prior to the vacuum pump.
-> Major temperatures : -70℃ (Less than RT.25℃)
-> Manufactured goods : 20ℓ, 40ℓ, 60ℓ
-> Available for custom manufacturing
This is the device to dry samples in the clean environment by making air circulating in the dry oven as clean air.
This is the air circulation dry oven mostly used for drying products requiring clean environment including semi-conductor or LCD display.
-> Major temperatures: 40℃ to 200℃
-> Manufactured goods: 90ℓ, 150ℓ
-> Available for custom manufacturing
Circulation water bath is a product used for incubating microorganism in the precise temperature condition by circulating water inside.
-> Temperature : 40℃~99℃
-> Manufactured goods : 11ℓ, 22ℓ
-> Available for custom manufacturing
Industrial vacuum dry oven indicates a large sized vacuum dry oven.
-> Major temperatures: 40℃ to 200℃
-> Manufactured goods: 125l, 400l, 600l
-> Available with custom manufacturing
Industrial vacuum dry oven indicates a large sized vacuum dry oven.
-> Major temperatures: 40℃ to 200℃
-> Manufactured goods: 125l, 400l, 600l
-> Available with custom manufacturing
This is the product requiring appropriate usage in the temperature less than 1200℃
Muffle furnace is a product widely used for quantitative analysis on experimented parts, measurement of organic substances or ash and moisture, glass dissolution, and the metal thermal processing experiment
-> Major temperature : 1000℃
-> Manufactured goods : 3ℓ , 5ℓ, 14ℓ
-> Custom manufacturing for large size
Constant thermal shock tester is a reliable measuring device to test abnormality on materials or parts by adding rapid thermal changes in low or high temperature on industrial materials or parts.
Auto clave is a product sterilizing the contents by controlling high temperature or pressure by heating water with certain temperature in the closed container.
-> Manufactured goods : 60ℓ, 100ℓ
Constant temp chamber is a device reliable to make it feasible to proceed experiment in low temperature other than the one with high temperature.
This device is used when humidity is not required, and when experiment is conducted only with temperature.
-> Major temperature : -40℃ ~ 98℃
-> Manufactured goods : 150ℓ , 252ℓ
-> Custom manufacturing from the size or temperature
Low temp (B.O.D) incubator is a device used if it is required to incubate B.O.D measurement in the high or low temperature.
-> Major temperatures : -5℃ ~ 60℃
-> Manufactured goods : 150ℓ, 250ℓ
-> Available for custom manufacturing